Greyscale_Geckos
New Member
- Messages
- 651
- Location
- Oregon, USA
So I have this old rack that used to hold all of my papers and I decided to convert one half of it into a hatchling rack. I figured that I will keep all of the hatchlings separate unless they are both small and the same size. With the measurements I got from one of the tubs though I'm not sure if it's big enough for a hatchling and so I wanted to check.
The measurements are L: 13 in., W: 10 in., and H: 5 in.
http://img.photobucket.com/albums/v661/Bayouriverreturn/tub1.jpg
http://img.photobucket.com/albums/v661/Bayouriverreturn/tub2.jpg
Here's the half of the rack that I want to convert (minus the empty tub which is cut out from the photo)...
http://img.photobucket.com/albums/v661/Bayouriverreturn/rack.jpg
I realize because of the spacing I'll have to make a covering somehow for each tub, heating, and also that I'll need the air holes. Other than the adjustments that need to be made, would this be an okay hatchling rack?
The measurements are L: 13 in., W: 10 in., and H: 5 in.
http://img.photobucket.com/albums/v661/Bayouriverreturn/tub1.jpg
http://img.photobucket.com/albums/v661/Bayouriverreturn/tub2.jpg
Here's the half of the rack that I want to convert (minus the empty tub which is cut out from the photo)...
http://img.photobucket.com/albums/v661/Bayouriverreturn/rack.jpg
I realize because of the spacing I'll have to make a covering somehow for each tub, heating, and also that I'll need the air holes. Other than the adjustments that need to be made, would this be an okay hatchling rack?
