Flexwatt and thermometers

[fOOlsgOld]

OK so the instructions with the flexwatt say to put the thermometer probe on the flexwatt its self (tape it on there) but I've read to put the probe on the tile.... what one should be done?

 

[hoppslover]

I havent used flexwatt. I use a heat pad made out of similar material, and I tape my temp probe right on the heat pad. I also have a thermometer that I tape down inside one tub on each shelf of my rack.

 

[jbodkin]

I havent used flexwatt. I use a heat pad made out of similar material, and I tape my temp probe right on the heat pad. I also have a thermometer that I tape down inside one tub on each shelf of my rack.

Are you using a Thermostat or Rheostat to control your tape?

 

[hondawingsfly]

i put mine right on the tape but with tile im not sure probably would want the probe where the geckos will be

 

[hoppslover]

I am using a thermostat.

 

[nats]

You need to put your prob on the surface of your substrate.
(where your leos tummy is)

It's also a good idea to put it on the warmest spot.

You can find the warmest spot very easy with a laser thermometer.

You can pick one up fairly cheap, and they do come in handy! :main_yes: