Newly finished Rack

[trizzypballr]

staples on the large rack. and the staple gun was to big for the small rack, so i had to hammer half inch nails

 

[paulnj]

I used aluminum tape to stick the flexwatt to my racks.

 

[trizzypballr]

that tape doesnt work on plywood though... Tried on my first rack

 

[paulnj]

mine has held tight for 9 months on $12 a sheet plywood I got the good tape , but ran out on my malamine rack and got some that doesn't hold as well.

 

[trizzypballr]

I bought a roll from the site that i got my heat tape from, and it was LOUSY! I think staples or nails which ever you perfer hold nicely, might take a few extra minutes but you dont have to worry about the containers rubbing the foil tape up and making it hard to move them in and out. That was what i ran into on my first rack.

 

[paulnj]

Agreed on the staples, but option B is there too is my point. Not everyone can get a staple gun into their rack or has a staple gun. Lowes sells the tape at $7? for 100 feet and the expensive stuff was around $14?

 

[Jennie]

nice rack

lmao

I agree looks great. :main_thumbsup: